Infineon Technologies AG is launching the XENSIV TLE4802SC16-S0000, an inductive sensor designed to enhance performance in automotive chassis applications. The sensor enables high-precision torque and angle measurements with robust stray field robustness, supporting digital output via SENT or SPC protocols. It achieves highly accurate sensing without needing additional shielding. Tailored for use in electric power…
ABLIC launches S-19116 automotive voltage detector with 6.8 μs response time and 2.0 μA consumption
ABLIC has launched the S-19116 Series automotive high-voltage detector. The device features a detection response time of 6.8μs maximum while maintaining current consumption of 2.0μA typical during operation. The S-19116 Series addresses functional safety requirements in automotive applications where overvoltage protection is critical for MCUs and sensors powered through battery regulators. The device detects voltage…
Infineon Technologies announces Z-direction magnetic field sensors
Infineon Technologies AG introduces the XENSIV TLE4960x magnetic switch family. Developed in accordance with ISO 26262, the TLE4960x switches integrate diagnostic functions to support functional safety applications with requirements up to ASIL B. They are the only ASIL-B-compliant switches on the market that can address a wide range of automotive applications, including window regulators, sunroof…
Omnivision’s driver monitoring sensor integrates ASIL-B security capabilities
OMNIVISION announced the new OX01N1B image sensor for in-cabin automotive driver monitoring systems (DMS). The device is the newest addition to OMNIVISION’s industry-leading Nyxel near-infrared (NIR) technology family of automotive sensors and is a 1.5-megapixel (MP) RGB-IR or monochrome BSI global shutter (GS) sensor with a pixel size of 2.2 microns (µm) and an optical…
STMicroelectronics launches accelerometer with on-chip ML core for industrial applications
STMicroelectronics’ IIS2DULPX industrial MEMS accelerometer combines machine learning, power saving, and capability to operate at high temperatures, facilitating intensive sensorization for smarter, data-driven operations and decision making in asset tracking, robotics, and factory automation, as well as industrial-safety equipment and healthcare devices. With in-sensor AI to relieve the host processor and automatic self-configuration to optimize…
TDK launches 2D Hall-effect sensors with ASIL certification
TDK Corporation introduces the stray-field robust Micronas HAL/HAR 35xy* 2D Hall-effect position sensor family for automotive and industrial applications. Building on the success of the HAL/HAR 39xy series, the new sensors offer enhanced features and capabilities to meet the growing demand for stray-field robust 2D position detection in linear and angular applications. While the HAL/HAR…
Same Sky releases piezo elements with 600 Hz – 10,500 Hz resonant frequencies
Same Sky’s Audio Group today announced the continued expansion of its piezoelectric elements product line. The CEB and CPT piezo element models feature extremely low profiles down to 0.12 mm and come with or without wire leads for simple and reliable design implementation in vibration detection or touch feedback applications. Externally driven and offering diameters…
TDK’s immersion sensor features <4s response time for EV coolings systems
TDK Corporation launches B58101A0851A000, the first in a new line of immersion temperature sensors (ITS), designed specifically for EV powertrain cooling applications. This highly responsive, fully sealed NTC thermistor is engineered to provide fast and precise temperature control, e.g., for oil-cooled systems. Oil cooling is anticipated to become the dominant temperature management method in the…
Torque sensors from Sensor Technology feature wireless data transmission capabilities
Sensor Technology Ltd has released the new SGR525/526 Torque Sensors featuring square shaft ends for integration with fastening applications. The sensors are engineered for torque measurement in power tools, test equipment, industrial machinery, and precision fastening operations without requiring additional adapters. The SGR525/526 series delivers real-time torque measurement data with high-precision specifications. The design incorporates…
Infineon expands MCU family with multi-technology sensing capabilities
Infineon Technologies AG announced that its PSOC 4 microcontroller (MCU) family now features Multi-Sense capabilities. Infineon expands its leading capacitive sensing technology CAPSENSE with a new, proprietary inductive sensing technology, as well as a non-invasive and non-contact liquid sensing solution. With PSOC 4, developers now have endless possibilities to develop new HMI and sensing solutions.…
Allegro Microsystems’ dual-signal current sensors protect wide bandgap devices
Allegro MicroSystems, Inc. announced the launch of two new current sensor ICs – the ACS37030MY and the ACS37220MZ. Leveraging Allegro’s cutting-edge sensing technology, these ICs provide low internal conductor resistance, high operating bandwidth, and reliable performance across a wide range of automotive, industrial, and consumer applications. Allegro’s new current sensor ICs are designed for precise…
TDK’s battery-efficient time-of-flight sensor operates in full sunlight conditions
TDK Corporation is presenting in its CES 2025 Booth #15815 how TDK MEMS sensors and solutions enable innovation in accessibility technology, as multi-award-winning company WeWALK announces the global availability of its Smart Cane 2 for visually impaired people. The WeWALK Smart Cane 2 is an intelligent assistive device empowered by TDK motion sensors, MEMS microphones,…
Multi-frequency Hall sensor advances inverter efficiency
ABLIC launched the S-5611A linear Hall effect IC for general-use devices. The adoption of natural energy such as solar power generation and wind power generation has continued to grow from a perspective of utilization of renewable energy, and there is also an increased focus on improving the efficiency of these types of energy in order…
Melexis launches current sensor with 16-bit over-current detection, 10-bit temperature monitoring
Melexis unveils the MLX91235, a new current sensor that eliminates the need for a ferromagnetic core. The MLX91235 expands Melexis’ portfolio, enabling the measurement of larger currents flowing through external primary conductors like PCB traces and busbars. It supports automotive and alternative mobility applications like inverters, battery management systems (BMSs), and low-voltage DC-DC converters. Power…
NewTek position sensors operate at pressures up to 30,000 PSI
NewTek offers a vented design for its miniaturized series of AC-operated position sensors that provide greater endurance to pressure, temperature, shock, and vibration. These attributes result in greater accuracy and the ability to fit into restrictive spaces when measuring the deformation of samples in test chambers for hydraulics and material testing applications. In geologic testing,…
LEM RCM sensor achieves ±0.5 mA accuracy for EV charging
LEM has introduced a residual current monitoring (RCM) type B sensor designed for bi-directional on-board chargers (OBCs) with ASIL B capabilities. The CDT sensor addresses safety requirements in vehicle-to-everything (V2X) applications, including vehicle-to-load, vehicle-to-grid, and vehicle-to-vehicle systems. Bi-directional OBCs enable users to power other vehicles, appliances, or homes from their EV battery pack. These systems require…
OMNIVISION introduces small-format sensor for HPD applications
OMNIVISION announced the new OV0TA1B monochrome (mono)/infrared (IR) CMOS image sensor, the first and only solution that fits 3mm module Y dimension and smaller notebook computers, webcams and IoT devices. The OV0TA1B is a low-power device that is ideal for artificial intelligence (AI)-based human presence detection (HPD), facial authentication and always-on (AON) technology. The OV0TA1B…
Position sensor reduces automotive component count
Melexis’ MLX90424 is a cost-effective solution simplifies automotive brake pedal sensing. For functional safety purposes, it integrates two position-sensing ICs and a wake-up switch all isolated in 1 package. The solution can be powered directly by the 12 V and handles precise measurements of linear displacement up to 30 mm. Reaching the state of the…
STMicroelectronics’ healthcare wearable chip integrates bio-section and AI
STMicroelectronics, has introduced a new bio-sensing chip for the next generations of healthcare wearables like smart watches, sports bands, connected rings, or smart glasses. The ST1VAFE3BX chip combines a high-accuracy biopotential input with ST’s proven inertial sensing and AI core, which performs activity detection in the chip to ensure faster performance with lower power consumption. Analysts…
Renesas signal processor integrates 32-bit core with IO protocol stack
Renesas Electronics Corporation has introduced two new semiconductor solutions for the IO-Link market: the CCE4511 four-channel IO-Link master IC and the ZSSC3286 IO-Link ready dual-channel resistive sensor signal conditioner IC. IO-Link, a digital communication protocol used in industrial automation, enables communication between sensors, actuators, and other automation system devices. The technology provides real-time data, diagnostics,…